Warner CB Series Clutch/Brake 308-26-119

$2,902.86

Out of Stock - Contact Us for Lead Time

  • 308-26-119
  • Wrap Spring Clutches and Clutch/Brakes
  • Model Size: CB-8
  • Voltage: 24 VDC
  • Static Torque: 2500 lb.in. (208.3 lb.ft., 282.5 N·m)
  • Max RPM: 300
  • Bore Size: 1-1/2″
  • Rotation: CCW

SPECIFICATIONS

Model Number 308-26-119
Factory Part Number M308-26-119
Series CB Series
Model Size CB-8
Ordering Code CB-8-CCW-24VDC-1-1/2″-1
Function Electrically Actuated Wrap Spring Clutch/Brake Package
Voltage 24 VDC
Bore Size 1-1/2″ (1.500″)
Direction of Rotation Counterclockwise (CCW)
Stop Collar Options 1-Stop Collar (Standard)
Anti-Overrun Not included
Factory Description CB8CCW24DC1.50B1ST
Compatible Power Supply Unit WSCC-101 (P/N 901-00-014) / WSCC-102 (P/N 901-00-019)
Static Torque 2,500 lb. in.
Max. Anti-Overrun Holding 600 lb. in.
Max. Anti-Back Holding 600 lb. in.
Maximum Speed 300 RPM
Response Time (voltage on, full speed) 50 ms
Weight 15 lb.
Compliance RoHS Compliant

 

pdf icon 1
Catalog Warner Electric CB Series Clutch / Brake Catalog

SERIES DESCRIPTION

The Warner Electric CB Series combination clutch/brakes accurately start and stop loads driven by a continuously rotating power source. CB units operate from a single AC or DC pulse, stopping the load within ±1/2° noncumulative at speeds up to 1800 RPM depending on size. Each unit is pre-engineered and pre-assembled for easy installation.

FEATURES

  • Adjustable control collars for easy and accurate output stop position setting.
  • Load over-travel or backup is eliminated since CB units lock the load in both directions when the solenoid is off.
  • Anti-overrun feature prevents the output from running faster than the input.
  • Permanently lubricated—never needs adjustment for wear.
  • Brings load up to speed in 3 milliseconds and stops within 1.5 milliseconds.

SELECTION PROCEDURE

  1. Step 1: Determine the clutch or brake function—Wrap spring clutches and brakes can perform three control functions: overrunning, start-stop and single revolution. Determine the function that will provide the best control for your application.
  2. Step 2: Determine the size—To select the correct size unit, determine the maximum RPM at which the clutch or brake will operate and the shaft diameter on which the wrap spring unit will be mounted. Locate the appropriate speed and shaft diameter points on the selection charts.
  3. Step 3: Verify the design function considerations—Once the appropriate series and model size have been determined, review the design considerations and the checklist of options detailed in the “How to Order” section for each series.

HOW TO ORDER

  • Specify Model Configuration: Reference model number 308-26-119 or use ordering code CB-8-CCW-24VDC-1-1/2″-1.
  • Verify Voltage and Rotation: Confirm your system matches the 24 VDC coil and counterclockwise direction.
5138237 e1722390771778

Got a Question? We’re Here To Help


Compatible Accessories

$538.37

  • 901-00-019
  • Power Supply
  • Model Size: WSCC-102
  • Input: 120/240 VAC, 50/60 Hz
  • Output: 160/290 VDC
  • Cycle Rate: 300 CPM

$538.37

  • 901-00-014
  • Power Supply
  • Model Size: WSCC-101
  • Input: 120/240 VAC, 50/60Hz
  • Output: 160/290 VDC
  • Cycle Rate: 300 CPM