Warner Electric 1315-2611 SLB-26 Power-On Clutch/Brake, 24 VDC, 1/2″ Bore, Lead Wires

$1,457.08

Lead time - 1 Week +

  • 1315-2611
  • SLB Series Power-On Clutch/Brake
  • Model: SLB-26
  • Voltage: 24 VDC
  • Static Torque: 80 lb.in. (6.67 lb.ft., 9.04 N·m)
  • Bore: 1/2″

SPECIFICATIONS

Part Number 1315-2611
Model SLB-26
Series Warner Electric SLB Series
Type Power-On Clutch/Brake
Rated Static Torque 80 lb. in. (9.04 N·m)
Typical Torque 65 lb. in. out of the box; 90 lb. in. after burnishing
Coil Voltage 24 VDC
Coil Current .350 A
Coil Resistance 67.1 Ω
Bore 1/2″
Keyway .125-.128 in. wide; .560-.567 in. key height plus bore
Electrical Connection Lead wires, 18 in.
Torque Build-Up Time 22 ms to 80%; 40 ms to 100%
Torque Decay Time 30 ms to 10% (with suppression diode)
Weight 60 oz. (3.75 lb.)
Air Gap Clutch set at the factory; brake .008-.020 in. (.203-.508 mm), set by the customer
Clutch Armature Hub Extended armature hub: (3) #8-32 tapped holes on 1.375 B.C.
Mounting Shaft mounted, brake closest to the load; restrain with a loose-fitting pin through the anti-rotation tab
Dimensions (in., see drawing) A = 4.050 max; B = 1.778; C = 2.240; D = 0.093 max; E = 0.150; F = 0.427 max; G = 1.610 max; H = 0.998; J = 2.640 max; K = 1.450 max; L = 2.650 max; M = 0.645 max; N = 0.190 min; P = 1.335 max; Q = 1.730 min; R = 0.480 min; S = 2.395 max
Agency Coil built with UL recognized materials; RoHS compliant
Factory Description SLB-26 24VDC 1/2 CL-BK

 

pdf icon 1
Catalog Warner Electric (Inertia Dynamics) Electric Clutches & Brakes Catalog (P-7874)
Manual SLB Clutch/Brake Installation Manual (P-8379)
Catalog Warner Electric Fractional HP Clutches/Brakes Catalog (P-1630)

SERIES DESCRIPTION

Warner Electric SLB Series clutch/brakes combine an SL clutch and an FB brake in one shaft-mounted package for parallel-shaft drives. A pulley, gear or sprocket on the clutch armature hub provides the input; energize the clutch to drive the load and the brake to stop and hold it while the input keeps turning.

FEATURES

  • Power-on design — torque is produced only while the coil is energized; no residual drag when power is removed.
  • Zero-backlash armature with spring release for precise, repeatable engagement.
  • Stationary field — no slip rings or brushes to wear out.
  • Asbestos-free friction material for long life and quiet operation; corrosion-protected parts.
  • UL recognized coil materials; RoHS compliant; 100% Hi-Pot tested.
  • One package — clutch and brake pre-aligned for simple installation.
  • Oil-impregnated bronze bearings.

SELECTION PROCEDURE

  1. Size by torque: Pick a size whose rated static torque exceeds the torque your load requires, with a service factor for inertia and cycle rate.
  2. Match the bore and voltage: Each part number is one bore and one coil voltage; 12, 24 and 90 VDC coils are standard.
  3. Plan for burnishing: Units reach rated torque after burnishing; out of the box they typically produce somewhat less.
  4. Use DC power: Filtered full-wave DC gives full torque; a diode across the coil protects the switch.
  5. Control: Never energize the clutch and brake at the same time.

TYPICAL APPLICATIONS

Start/stop and indexing drives on printers, feeders, packaging machines and conveyors.

HOW TO ORDER

  • Specify Part Number: Order 1315-2611 (SLB-26, 24 VDC, 1/2″ bore).
  • Verify Coil Voltage: Confirm your supply provides 24 VDC filtered, full-wave DC; half-wave DC gives lower torque.
  • Anti-Rotation: Restrain the field with a loose-fitting pin or bracket through the anti-rotation tab. Do not bolt the tab solid, which preloads the bearings.
  • Burnish for Full Torque: New units typically deliver less than rated torque until burnished. Energize at 30-40% of rated voltage and slip the unit for 2-3 minutes, ideally in its final location.
  • Arc Suppression: Fit a diode across the coil; published decay times assume one.
5138237 e1722390771778

Got a Question? We’re Here To Help