Warner Electric 1701-6221 FSB001 Spring Applied Brake, 220 VAC, 3/16″ Bore

$351.24

Lead time - 1 Week +

  • 1701-6221
  • FSB Spring Applied Brake
  • Model: FSB001
  • Voltage: 220 VAC
  • Static Torque: 1 lb. in.
  • Bore: 3/16″

SPECIFICATIONS

Part Number 1701-6221
Model FSB001
Series Warner Electric FSB Series
Type Spring Applied (Power-Off) Brake
Static Torque 1 lb. in. (0.11 N·m)
Coil Voltage 220 VAC
Bore 3/16″
Coil Data Contact us for coil current and resistance at this voltage
Hub Style Square Drive
Shaft Retention Set screws (no keyway)
Electrical Connection Lead wires, 12 in.
Maximum Speed 9,000 RPM
Inertia (Armature & Hub) .0004 lb. in.²
Weight 2 oz. (0.12 lb.)
Air Gap Set at the factory
Mounting Flange mount: (3) K holes on the J pitch circle, H pilot; hold mounting face square to the shaft within .005 in. T.I.R.
Dimensions (in., see drawing) A = .890; B = .710; C = .072; D = .510; E = 1.485; F = .320; G = .280; H = 1.375; I = 12.0; J = 1.180; K = .113; L = 3/8
Agency Coil built with UL recognized materials; RoHS compliant
Factory Description FSB-001 220VAC 3/16 BK

 

pdf icon 1
Catalog Warner Electric Spring Applied Friction Brakes FSB/FSBR Catalog (P-8997)
Catalog Warner Electric (Inertia Dynamics) Electric Clutches & Brakes Catalog (P-7874)

SERIES DESCRIPTION

Warner Electric FSB Series spring applied brakes (formerly Inertia Dynamics) are flange-mounted, fail-safe brakes that decelerate or hold a load whenever power is removed. Compression springs clamp the friction disc between the armature and pressure plate; energizing the coil pulls the armature away so the shaft turns freely. Seven sizes cover 1 to 100 lb. in. static torque with square, hex or zero-backlash hubs.

FEATURES

  • Fail-safe — engages automatically on power loss.
  • Compact flange mount for servo and stepper motors.
  • Zero-backlash hubs available on sizes 007-050 for precise positioning.
  • Air gap set at the factory; no adjustment needed.
  • 12, 24, 90 VDC and 120 VAC coils; metric bores available.
  • UL recognized coil materials; RoHS compliant.

SELECTION PROCEDURE

  1. Size by torque: Pick a size whose static torque exceeds the holding or stopping torque the load requires.
  2. Check speed and cycle rate: Stay within the maximum input RPM and the allowable cycles per minute for your load inertia.
  3. Choose the hub: Hex drive is standard; choose zero backlash where positioning accuracy matters.
  4. Mounting: Keep the mounting face square to the shaft within .005 in. T.I.R.

TYPICAL APPLICATIONS

Servo and stepper motor holding brakes, robotics, medical equipment, packaging machinery, automated guided vehicles and conveyors.

HOW TO ORDER

  • Specify Part Number: Order 1701-6221 (FSB001, 220 VAC, 3/16″ bore).
  • Verify Coil Voltage: Confirm your supply provides 220 VAC. The brake has an internal rectifier.
  • Fail-Safe Operation: Springs apply the brake whenever power is off; energize the coil to release it.
  • Burnish for Full Torque: Slip the engaged brake (coil off) for 1-3 minutes at 60-200 RPM, ideally in its final location, to reach full rated torque.
5138237 e1722390771778

Got a Question? We’re Here To Help