SPECIFICATIONS
| Part Number | 5151-541-004 |
| Fits | Warner Electric ERS-42 brake |
| Type | Splined Drive Hub |
| Bore | .625 in. (5/8″) |
| Mating Key (not furnished) | 3/16 x 3/16 in. |
| Hub Length (nominal) | .700 in. |
| Set Screws | (2) 8-32 x 3/16 |
| Set Screw Torque | 20 lb. in. |
| Hub Inertia | .040 lb. in.² |
| Weight | 0.20 lb. |
| Factory Description | SPLINED HUB ERS-42-5/8 |
| Catalog | Warner Electric Electrically Released Spring-Set Brakes Catalog (P-8589) | |
| Manual | Warner Electric ERS Installation Instructions (P-219) |
SERIES DESCRIPTION
The Warner Electric ERS Series is an electrically released, spring-set brake built for static holding and occasional emergency stops. When power is off, springs clamp the armature against the friction disc so the brake holds the load; energizing the coil pulls the armature away and lets the shaft turn freely. The ERS ships fully assembled and needs no adjustment or run-in. Five sizes cover 1.5 to 100 lb. ft. of static torque, with a splined drive disc that mates with a Warner splined hub (sold separately) or your own splined shaft.
FEATURES
- Fail-safe operation — the brake engages automatically on power loss.
- Holding and emergency stopping — designed for static engagement with occasional e-stops.
- Compact, low-profile package with through-bolt, tapped-hole or flange mounting.
- Splined drive for high torque, low backlash and long life.
- Quick, quiet engagement; no adjustment or maintenance required.
- UL listed in all sizes.
SELECTION PROCEDURE
- Confirm the duty: ERS brakes are for holding and occasional emergency stops. For frequent dynamic braking, use an ER, ERD or FB brake.
- Size by torque: Choose a size whose static torque exceeds the holding torque the load requires.
- Check the mounting: Mounting holes must be within .014 in. true position of the shaft centerline and the face within .005 in. of perpendicular.
- Horizontal shafts: ERS brakes are intended for horizontal shafts; contact us before using one on a vertical shaft.
TYPICAL APPLICATIONS
Motor holding brakes, medical scanners and patient tables, robotics, packaging machinery, door and gate drives, and other equipment that must hold position when power is removed.
HOW TO ORDER
- Specify Part Number: Order 5151-541-004 for a .625 in. (5/8″) shaft.
- Mating Key: Supply your own key; the hub is located with two set screws tightened to 20 lb. in.
- Full Spline Engagement: The hub may sit anywhere on the shaft as long as its splines fully engage the ERS-42 friction disc, which must slide freely on the hub.
Got a Question? We’re Here To Help
- For Manuals, Catalogs & Documentation: See Files Section
- Need More Help? Contact Us

