SPECIFICATIONS
| Part Number | 5158-170-015 |
| Model | ERS-26 |
| Series | Warner Electric ERS Series |
| Type | Electrically Released, Spring-Set (Fail-Safe) Brake |
| Static Torque | 1.5 lb. ft. (18 lb. in. / 2.0 N·m) |
| Coil Voltage | 90 VDC |
| Power | 16.0 W |
| Current | 0.178 A |
| Coil Resistance | 506.5 Ω |
| Release Time | 0.03 s |
| Apply Time | 0.04 s (Circuit A) / 0.01 s (Circuit B) |
| Outside Diameter | 2.460 in. (63 mm) max. |
| Length | 1.515 in. (39 mm) max. |
| Mounting Bolt Circle | 2.125 in. (54 mm) |
| Through-Bolt Fasteners | (4) #6-32 |
| Hub Bores Available | 1/4″, 5/16″, 3/8″ |
| Inertia (Brake / Hub) | .03 / .004 lb. in.² |
| Weight | 1.20 lb. (without hub) |
| Mounting | Through-bolt, tapped holes or optional mounting plate |
| Agency Approval | UL Listed |
| Factory Description | BK ERS-26 90V |
| Catalog | Warner Electric Electrically Released Spring-Set Brakes Catalog (P-8589) | |
| Manual | Warner Electric ERS Installation Instructions (P-219) |
SERIES DESCRIPTION
The Warner Electric ERS Series is an electrically released, spring-set brake built for static holding and occasional emergency stops. When power is off, springs clamp the armature against the friction disc so the brake holds the load; energizing the coil pulls the armature away and lets the shaft turn freely. The ERS ships fully assembled and needs no adjustment or run-in. Five sizes cover 1.5 to 100 lb. ft. of static torque, with a splined drive disc that mates with a Warner splined hub (sold separately) or your own splined shaft.
FEATURES
- Fail-safe operation — the brake engages automatically on power loss.
- Holding and emergency stopping — designed for static engagement with occasional e-stops.
- Compact, low-profile package with through-bolt, tapped-hole or flange mounting.
- Splined drive for high torque, low backlash and long life.
- Quick, quiet engagement; no adjustment or maintenance required.
- UL listed in all sizes.
SELECTION PROCEDURE
- Confirm the duty: ERS brakes are for holding and occasional emergency stops. For frequent dynamic braking, use an ER, ERD or FB brake.
- Size by torque: Choose a size whose static torque exceeds the holding torque the load requires.
- Check the mounting: Mounting holes must be within .014 in. true position of the shaft centerline and the face within .005 in. of perpendicular.
- Horizontal shafts: ERS brakes are intended for horizontal shafts; contact us before using one on a vertical shaft.
TYPICAL APPLICATIONS
Motor holding brakes, medical scanners and patient tables, robotics, packaging machinery, door and gate drives, and other equipment that must hold position when power is removed.
HOW TO ORDER
- Specify Part Number: Order 5158-170-015 (ERS-26, 90 VDC).
- Verify Coil Voltage: Confirm your DC supply provides 90 VDC.
- Order a Splined Hub: The brake ships without a hub. Choose the hub for your shaft: 1/4″ – 5158-541-006; 5/16″ – 5158-541-007; 3/8″ – 5158-541-008.
- Optional Mounting Plate: 686-0182.
- AC Power: On 115 VAC, power this 90 VDC brake with the Warner Electric CBC-100-1 control (6003-448-101).
Got a Question? We’re Here To Help
- For Manuals, Catalogs & Documentation: See Files Section
- Need More Help? Contact Us



