Current is carried through brushes and the collector ring to the rotating magnet. The PC design is less expensive than the SF design.
SPECIFICATIONS
Model Name | PC Series PC-500 Clutch |
Function | Primary Clutch |
Shaft Size | .500 – 1.250 |
Max. Rated Torque | 40 lb. ft |
Max. RPM | 5,400 rpm |
Standard Voltage | 6, 24, 90 DC |
Outside Diameter | 6 Inches |
Overall Length | 3.25 Inches |
Manufacturer Drawing | I-25507 |
SERIES DESCRIPTION
Custom design brakes and clutches are user-assembled from standard components for optimum performance in the smallest possible package size.
- Easily adaptable to any mounting requirement
- Low initial cost
- Wide range of models and options
CATALOG & MANUALS
![]() | ||
Catalog | Warner Electric Basic Design Clutches Brakes Catalog | |
Users Manual / Installation Instructions | Warner Electric PC-500 Users Manual / Installation Instructions | |
Quick Information | Warner Electric PC-500 Quick Information |
PC-500 Parts List | |||
Item | Description | Part Number | Qty. |
1 | Magnet Hub | 5300-541-001 | 1 |
1-1 | Collector Ring | 5300-749-001 | 1 |
1-2 | Collector Ring Mounting Acc. | 5300-101-002 | 1 |
2 | Brushholder | 5300-178-001 | 1 |
2-1 | Brush | 176-0001 | 4 |
3 | Bushing* | 1 | |
1/2″ to 1-1/4″ Bore | 180-0116 to 180-0128 | ||
4 | Magnet | 1 | |
6 Volt. | 5300-631-002 | ||
24 Volt | 5300-631-003 | ||
90 Volt | 5300-631-005 | ||
4-1 | Terminal Accessory | 5311-101-001 | 1 |
5 | Armature | 5300-111-002 | 1 |
6 | Autogap Accessory | 5200-101-009 | 3 |
7 | Mounting Accessory | 5102-101-001 | 2 |