PCBC Series Clutch
PCBC-1225/1000
™ Current is carried through brushes and the collector ring to the rotating magnet. The PC design is less expensive than the SF design.
These units, when used in conjunction with the correct
Warner Electric conduit box, meet the standards set of
UL508 and are listed under guide card #NMTR2, file
#59164.
These units are CSA certified under file #LR11543.
Product Data – Reference (Pages 16-73) in catalog P-1264
PCBC-1225/1000 | |||
Item | Description | Part Number | Qty. |
1 | Bushing* | 1 | |
3/4” to 2-11/16” Bore | 180-0026 to 180-0057 | ||
2 | Retainer Ring | 748-0005 | 1 |
3 | Splined Hub | 540-0064 | 1 |
4 | Armature & Splined Adapter | 5323-111-001 | 1 |
4-1 | Locknut | 661-0005 | 4 |
4-2 | Armature | 5323-111-034 | 1 |
4-3 | Splined Adapter | 104-0010 | 1 |
4-4 | Autogap Accessory | 5323-101-002 | 1 |
4-6 | Screw | 797-0281 | 4 |
5 | Mounting Accessory | 5321-101-001 | 1 |
6 | Magnet | 1 | |
6 Volt | 5333-631-008 | ||
90 Volt | 5333-631-009 | ||
†90 Volt LK Facing | 5333-631-013 | ||
6-1 | Terminal Accessory | 5311-101-001 | 1 |
7 | Magnet Hub | 1 | |
Left Hand (shown) | 5302-541-004 | ||
Right Hand | 5302-541-005 | ||
7-1 | Collector Ring | 5301-749-001 | 1 |
7-2 | Collector Ring Accessory | 5303-101-004 | 1 |
8 | Brushholder | 5300-178-001 | 1 |
8-1 | Brush | 176-0001 | 4 |
9 | Bushing* | 1 | |
1/2” to 2-1/2” Bore | 180-0185 to 180-0217 | ||
10 | Armature | 5302-111-013 | 1 |
11 | Autogap Accessory | 5201-101-008 | 3 |
12A | Mounting Accessory – I.M. | 5321-101-001 | 1 |
12B | Mounting Accessory – O.M. | 5321-101-002 | 2 |
13A | Magnet – Inside Mounted | 1 | |
6 Volt | 5312-631-004 | ||
90 Volt | 5312-631-006 | ||
13A-1 | Terminal Accessory | 5311-101-001 | 1 |
13B | Magnet – Outside Mounted | 1 | |
6 Volt | 5312-631-011 | ||
90 Volt | 5312-631-012 | ||
13B-1 | Terminal Accessory | 5311-101-001 | 1 |
14 | Conduit Box | 5200-101-011 | 1 |
Click on the links below to see Drawings and Specs:
Warner Electric PCBC Series Clutch Series PDF