Warner Electric SF110-M6-24 SF-110 Stationary Field Clutch, 24 VDC, 6 mm Bore

$377.51

Lead time - 1 Week +

  • SF110-M6-24
  • SF Series Clutch
  • Model: SF-110
  • Voltage: 24 VDC
  • Static Torque: 6 lb.in. (0.5 lb.ft., 0.68 N·m)
  • Bore: 6 mm

SPECIFICATIONS

Part Number SF110-M6-24
Model SF-110
Series Warner Electric SF Series
Type Stationary Field Clutch for Parallel Shafts (power-on)
Static Torque 6 lb. in. (0.68 N·m)
Coil Voltage 24 VDC
Coil Current .198 A
Coil Resistance 121 Ω
Bore 6 mm
Shaft Retention (2) set screws 90° apart; no keyway
Armature Hub Knurled armature hub, E = .506 in.
Electrical Connection Lead wires, 12 in., UL style 1213/1015/1430, 22 gauge
Inertia (Rotor / Armature & Hub) .0058 / .0029 lb. in.²
Response Time (80% build-up / 100% build-up / 10% decay) 7.2 / 10.5 / 11 ms
Weight 3.2 oz. (0.2 lb.)
Air Gap .018 in., set at the factory
Dimensions (in., see drawing) A = 1.409; B = .147; C = .396; D = 1.160; G = .935; H = .777; I = .380; J = .122; K = .875; L = .585; M = 12.00; O = .087
Agency UL recognized coil materials; RoHS compliant
Factory Description SF-110 6MM 24VDC CL

 

pdf icon 1
Catalog Warner Electric Fractional HP Clutches & Brakes Catalog (P-1630)

SERIES DESCRIPTION

Warner Electric SF Series stationary field clutches are bearing mounted clutches for parallel shaft applications. The clutch mounts on one shaft and drives a second, parallel shaft through a customer-supplied pulley, sprocket or gear fastened to the armature hub. Energizing the stationary coil pulls the zero-backlash armature against the rotor to transmit torque; removing power releases it with no residual drag. Sizes SF-110, SF-150 and SF-180 cover 6 to 15 lb. in.

FEATURES

  • Power-on design — torque only while the coil is energized; no residual drag when power is removed.
  • Stationary field — no slip rings or brushes; anti-rotation tab holds the field.
  • Zero-backlash armature with spring release for precise, repeatable engagement.
  • Bearing mounted; air gap preset at the factory (.018 in.).
  • Extended armature hub on SF-150 and SF-180 with (3) #4-40 tapped holes on a .812 in. bolt circle for mounting a pulley or sprocket.
  • 12, 24 and 90 VDC coils; UL recognized lead wire; RoHS compliant.

SELECTION PROCEDURE

  1. Size by torque: Pick a size whose static torque exceeds the torque your load requires, with a service factor for inertia and cycle rate.
  2. Match bore and voltage: Each part number is one bore and one coil voltage. Shafts are retained by set screws (no keyway) on these sizes.
  3. Hold the field: Restrain the anti-rotation tab without side-loading the bearing.

TYPICAL APPLICATIONS

Copiers and printers, packaging machinery, document and mail handling, postal sorters, conveyors, medical equipment and textile machinery.

HOW TO ORDER

  • Specify Part Number: Order SF110-M6-24 (SF-110, 24 VDC, 6 mm bore).
  • Verify Coil Voltage: Confirm your supply provides 24 VDC. Use filtered DC; a diode across the coil protects the switch.
  • Mount the Drive Element: Fasten your pulley, sprocket or gear to the armature hub; it turns with the hub only while the coil is energized.
  • Restrain the Field: Hold the anti-rotation tab with a pin or bracket that allows slight float; do not clamp it rigidly.
5138237 e1722390771778

Got a Question? We’re Here To Help