Adjustable Torque

Adjustable Torque Control for Soft Start-Stop

Warner Electric’s Adjustable Torque Controls provide soft starting and stopping functions. The torque transmitted by a clutch or brake is proportional to the coil current. Warner Electric offers several models that provide full range torque control for smooth and repeatable starts and stops. All adjustable torque controls can be used with electrically released brakes.

Warner Electric’s Adjustable Torque Controls provide soft starting and stopping functions. The torque transmitted by a clutch or brake is proportional to the coil current. Warner Electric offers several models that provide full range torque control for smooth and repeatable starts and stops. All adjustable torque controls can be used with electrically released brakes.

Adjustable Torque Control The MCS-103-1 is an enclosed control complete with a cover and mounting provisions. It operates up to four units, two at a time. The external wiring is connected to the terminal strip located behind the cover.

MCS-103-1
Model No.	Input Voltage	Output Voltage	Part No.
MCS-103-1	120 VAC	1.25 Amp, 90 V	6010-448-002

CBC-200 Series (Obsolete, replaced by CBC-300)

Dual Channel, Single Torque Adjustable The CBC-200 is a dual channel control with one adjustable current and one fixed voltage. Switch selection tunes the control to exactly match power requirements and operating characteristics of each clutch or brake. Individual torque adjustment allows preset maximum torque tailored to the application’s requirements. The adjustable torque channel can be used with an electrically released brake.

CBC – 300 Series

l Channel, Dual Torque Adjustable The CBC-300 has two adjustable current channels. Switch selection tunes the control to exactly match power requirements and operating characteristics of each clutch or brake. Individual torque adjustment allows preset maximum torque tailored to the application’s requirements.

---

CBC-300 

---

Model No.	Input Voltage	Output Voltage	Part No.
CBC-300	120 VAC	0-90 volt	6021-448-009
CBC-300-1	120 VAC	0-90 volt	6021-448-002
CBC-300-2	120 VAC	0-90 volt	6021-448-003
CBC-300-3	120 VAC	0-90 volt	6021-448-004

PANEL MOUNTED CONTROLS
CBC-1825R Series

The CBC-1825R is designed to provide consistent and repeatable acceleration and deceleration when used with Warner Electric 90 VDC clutches and brakes. Current to each channel is introduced along an adjustable time ramp and monitored continuously. Adjustments include initial pull-in pulse, hold level, maximum torque, and ramp time. LEDs are provided on the circuit board to indicate power is applied to the clutch or brake unit.Note: It is recommended that the auto-gap springs be removed from the clutch and brake for successful accel-decel application.

CBC-1825-R
Model No.	Input Voltage	Output Voltage	Part No.
CBC-1825-R	120 VAC	90 VDC	1825-448-001

CBC-500 Series

Dual Channel Torque Adjustable The CBC-500 is a dual channel adjustable voltage control with optically isolated input switching for 24 and 90 volt electric clutches and brakes. These controls can be set up to energize the two outputs alternately (single) or simultaneously (dual).

CBC-550 Series

Dual Adjustable with Power Transformer The CBC-550 is a dual channel adjustable voltage control with optically coupled switching for 24 and 90 volt electric clutches and brakes. These controls can be set up to energize the two outputs alternately (single) or simultaneously (dual). The CBC-550 has a power transformer which will operate with a 120, 220, 240, 380, or 480 VAC input.

CBC-550
Model No.	Input Voltage	Output Voltage	Part No.
CBC-550-24	120/220/240/380/480 VAC	0-24 VDC	6024-448-005
CBC-550-90	120/220/240/380/480 VAC	0-90 VDC	6024-448-006

Manuals and Specifications

Catalog	Warner Electric Clutch & Brake Controls Adjustable Torque Catalog