SBC-AC/SBC-AC2 Power Supply 24 volt output

Linear Actuators SBC-AC/SBC-AC2 24 volt Power Supply

SBC-AC/SBC-AC2 Power Supply 24 volt output
K2/K2X Power Supplies

Input: AC: 115 volt AC, AC2: 230 volt AC
Output: 24 volts @ 12 ampss

Input Cable:
Standard:6 ft. (1.829m) open end, tinned cable
Optional for 115 AC 6 ft. (1.829m) with 115 VAC 3 prong plug

Output Cable: Standard 1 ft. (.30m) cable: specify connector to match actuator:
1) Mini Packard standard for M-Track actuators
2) Packard 56 standard on K2 and K2x model actuators
3) Packard WeatherPack optional on K2 and K2x model actuators
4) Deutsch DT06-2S optional on K2 and K2x model actuators
Optional extension output cables can be ordered in 5 25 ft. (1.524-7.62m) lengths

Enclosure: 6.69”L x 6.69”W x 3.54”H (169.93mm L x 169.93mm W x 89.916mm H) polycarbonate housing NEMA 4, 4x, 12, 13

Fusing: External fuse mounted on enclosure for easy replacement

Switching: DPDT momentary rocker switch for manual actuator control or Customer may supply their own switch

Live Power Option: When used with BTc control options (limit switch, potentiometer feedback) the Live Power option is required. Live power option provides a constant output power source for external control components regardless of output power to the actuator. (see Extension Cable selection to select the correct cable for this option)

Manuals and Specifications

CatalogWarner Electric Linear Electric Actuators and Actuator Controls 

No products were found matching your selection.