CALL 800-985-6929
Mon-Fri 7AM - 7PM CST
EP Series Electro Pack
Electro Packs are rugged, pre-assembled clutch and brake combinations in an enclosed, foot mounted housing. They are factory aligned and pre-assembled and have been designed to mate easily with industry standard motors and reducers with v-belts, pulleys, chain and sprockets, in line couplings and timing belt drives.
Features
• Bolt-it-down and wire-it-up . . . it’s ready to go!
• Maintenance free
• A wide torque range from 15 lb. in. to 1350 lb. ft.
Selection Procedure
Determine the shaft speed at the Electro
Pack location. The number listed at the
intersection of horsepower and speed is
the size Electro Pack you require.
(EP) Series Electro Pack
Product Data – Reference (Pages 94-99) in catalog P-1234
EP SERIES
Model No. | Voltage D.C. | Part No. |
EP-170 | 6 | 5633-273-002 |
EP-170 | 24 | 5633-273-003 |
EP-170 | 90 | 5633-273-005 |
EP-250 | 6 | 5130-273-031 |
EP-250 | 24 | 5130-273-032 |
EP-250 | 90 | 5130-273-034 |
EP-400 | 6 | 5131-273-009 |
EP-400 | 24 | 5131-273-010 |
EP-400 | 90 | 5131-273-011 |
EP-500 | 6 | 5230-273-003 |
EP-500 | 24 | 5230-273-011 |
EP-500 | 90 | 5230-273-002 |
EP-825 | 6 | 5231-273-003 |
EP-825 | 24 | 5231-273-004 |
EP-825 | 90 | 5231-273-002 |
EP-1000 | 6 | 5232-273-003 |
EP-1000 | 24 | 5232-273-005 |
EP-1000 | 90 | 5232-273-002 |
EP-1525 | 6 | 5234-273-003 |
EP-1525 | 90 | 5234-273-002 |
EP-1525HT | 24 | 5234-273-017 |
EP-1525HT | 90 | 5234-273-012 |
EP SERIES – ELECTRO PACK
COMPONENT PARTS
Desription | EP-170 Part No | EP-250 Part No | EP-400 Part No |
Magnet Assembly 6 volt | 5375-631-003 | 5319-631-002 | 5115-631-002 |
Magnet Assembly 24 volt | 5375-631-005 | 5319-631-003 | 5115-631-003 |
Magnet Assembly 90 volt | 5375-631-007 | 5319-631-005 | 5115-631-004 |
Terminal Accessory | 5103-101-002 | 5103-101-002 | |
Armature Assembly with Autogap | 110-0111 | 5130-111-008 | 5131-111-001 |
Housing | 535-0079 | 535-0082 | 535-0083 |
Armature Spacer | 807-1021 | ||
Splined Armature Hub | 540-1250 | ||
Rotor Assembly | 5603-751-029 | 5103-751-010 | 5104-751-034 |
Field Assembly 6 volt | 5603-451-047 | 5103-451-002 | 5104-451-032 |
Field Assembly 24 volt | 5603-451-049 | 5103-451-004 | 5104-451-033 |
Field Assembly 90 volt | 5603-451-051 | 5103-451-007 | 5104-451-034 |
Terminal Accessory | 5103-101-002 | 5103-101-002 | |
Ball Bearing | 166-0112 | 166-0114 | 166-0116 |
Key | 590-0095 | 590-0014 | |
Key | 590-0016 | ||
Shaft, Brake | 798-0136 | 798-0133 | 798-0131 |
Retainer Ring | 748-0346 | 748-0347 | 748-0348 |
Retainer Ring | 748-0042 | 748-0024 | 748-0022 |
Key | 590-0089 | 590-0088 | 590-0087 |
Key | 590-0106 | ||
Capscrew | 797-1219 | 797-1219 | 797-1220 |
Lockwasher | 950-0351 | 950-0351 | 950-0355 |
Bearing Housing | 535-0080 | 535-0081 | 535-0084 |
Ball Bearing, with Retainer | 166-0111 | 166-0113 | 166-0115 |
Shaft, Clutch | 798-0135 | 798-0134 | 798-0132 |
Cover Plate | 686-1017 | 686-1018 | 686-1019 |
Screw | 797-0015 | 797-0015 | 797-0015 |
Dust Plug | 680-0037 | 680-0037 | 680-0037 |
Gasket | 495-0003 | 495-0004 | 495-0005 |
Insulator | 572-0573 | 572-0572 | 572-0574 |
Vertical Mfg. Spring KitO ptional | 5603-101-001 | 5103-101-006 | 5104-101-005 |
GroundScrew | 797-1245 | 797-1245 | |
Terminal | 900-0116 | 900-0016 |
EP SERIES – ELECTRO PACK
COMPONENT PARTS
Description | EP-500 Part No |
Magnet Assembly 6 volt | 5300-631-009 |
Magnet Assembly 24 volt | 5300-631-010 |
Magnet Assembly 90 volt | 5300-631-011 |
Terminal Accessory | 5311-101-001 |
Armature Assembly | 5230-111-002 |
Armature | 5230-111-001 |
Retainer Ring | 748-0355 |
Spring | 808-0412 |
Retainer Plate | 748-0364 |
Screw | 797-0028 |
Mounting Frame | 174-0028 |
Splined Hub | 540-2035 |
Rotor | 5230-751-001 |
Field 6 volt | 5230-451-003 |
Field 24 volt | 5230-451-005 |
Field 90 volt | 5230-451-002 |
Terminal Accessory | 5311-101-001 |
Capscrew | 797-0416 |
Lockwasher | 950-0107 |
Ball Bearing | 166-0125 |
Key | 590-0020 |
Retainer Ring | 748-0361 |
Shaft, Brake | 798-0022 |
Key | 590-0022 |
Retainer Ring | 748-0335 |
Capscrew | 797-0418 |
Lockwasher | 950-0107 |
Endbell Housing | 535-0010 |
Ball Bearing | 166-0127 |
Key | 590-0021 |
Shaft, Clutch | 798-0023 |
Cover Drip Proof | 287-0068 |
Capscrew | 797-1214 |
Lockwasher | 950-0102 |
EP SERIES – ELECTRO PACK
COMPONENT PARTS
Description | EP-825 Part No |
Magnet Assembly 6 volt | 5311-631-002 |
Magnet Assembly 24 volt | 5311-631-003 |
Magnet Assembly 90 volt | 5311-631-004 |
Terminal Accessory | 5311-101-001 |
Armature Assembly & Splined Adapter | 5321-111-001 |
Screw | 797-0272 |
Autogap Accessory | 5321-101-006 |
Splined Adapter | 104-0008 |
Armature | 5321-111-022 |
Locknut | 661-0004 |
Frame | 174-0019 |
Splined Hub | 540-0320 |
Armature & Splined Adapter | 5201-111-001 |
Locknut | 661-0004 |
Splined Adapter | 104-0008 |
Autogap Accessory | 5321-101-006 |
Spacer | 748-0333 |
Armature | 5321-111-022 |
Screw | 797-0341 |
Bushing, 1-1/4″ Bore | 180-0113 |
Rotor Hub | 540-0013 |
Rotor | 5201-751-003 |
Field 6 volt | 5201-451-006 |
Field 24 volt | 5201-451-008 |
Field 90 volt | 5201-451-010 |
Mounting Accessory | 5201-101-007 |
Mounting Accessory | 5321-101-001 |
Screw | 797-1008 |
Oil Seal | 795-0023 |
Retainer Plate | 686-0031 |
Ball Bearing | 166-0126 |
Retainer Ring | 748-0336 |
Key | 590-0019 |
Shaft, Brake | 798-0019 |
Retainer Ring | 748-0335 |
Capscrew | 797-0351 |
Lockwasher | 950-0354 |
Endbell Housing | 535-0005 |
Ball Bearing | 166-0125 |
Key | 590-0018 |
Shaft, Clutch | 798-0020 |
Cover, Drip Proof | 287-0069 |
Capscrew | 797-1214 |
Lockwasher | 540-0102 |
EP SERIES – ELECTRO PACK
COMPONENT PARTS
Description | EP-1000 Part No |
Magnet Assembly 6 volt | 5312-631-004 |
Magnet Assembly 24 volt | 5312-631-005 |
Magnet Assembly 90 volt | 5312-631-006 |
Wire Assembly | 5232-954-003 |
Wire Assembly | 5232-954-004 |
Terminal Accessory | 5311-101-001 |
Armature & Splined Adapter | 5322-111-002 |
Button Head Screw | 797-0272 |
Autocap Accessory | 5322-101-004 |
Splined Arm, Adapter | 104-0009 |
Armature | 5322-111-036 |
Locknut | 661-0004 |
Frame | 174-0043 |
Dust Cover | 287-0052 |
Button Head Screw | 797-1175 |
Lockwasher | 950-0103 |
Splined Armature Hub | 540-0061 |
Bushing, 1-7/8″ Bore | 180-0177 |
Armature & Splined Adapter | 5202-111-001 |
Locknut | 661-0004 |
Splined Armature Adapter | 104-0009 |
Autogap Accessory | 5322-101-004 |
Spacer | 748-0333 |
Armature | 5322-111-036 |
Capscrew | 797-0341 |
Bushing, 2″ Bore | 180-0179 |
Rotor Hub | 540-0315 |
Rotor | 5202-751-003 |
Field Assembly 6 volt | 5202-451-004 |
Field Assembly 24 volt | 5202-451-006 |
Field Assembly 90 volt | 5202-451-007 |
Mounting Accessory | 5321-101-001 |
Mounting Accessory | 5201-101-007 |
Mounting Accessory | 5321-101-001 |
Oil Seal | 795-0024 |
Button Head Screw | 797-1008 |
Retainer Plate | 686-0047 |
Retainer Ring – External | 748-0504 |
Ball Bearing | 166-0130 |
Retainer Ring – Internal | 748-0375 |
Key | 590-0024 |
Shaft, Brake | 798-0026 |
Capscrew | 797-0361 |
Lockwasher | 950-0362 |
Bearing Housing | 535-0012 |
Ball Bearing | 166-0131 |
Key | 590-0025 |
Shaft, Clutch | 798-0025 |
Manuals and Specifications
Specifications | Warner Electric EP Series Electro Pack Specifications |
- 5130-273-031
- EP Series
- Model Size: EP-250
- Voltage: 6 VDC
- Static Torque: 70 lb. in.
- Max RPM: 7500
- 5130-273-032
- EP Series
- Model Size: EP-250
- Voltage: 24 VDC
- Static Torque: 70 lb. in.
- Max RPM: 7500
- 5130-273-034
- EP Series
- Model Size: EP-250
- Voltage: 90 VDC
- Static Torque: 70 lb. in.
- Max RPM: 7500
- 5130-273-053
- EP Series
- Model Size: EP-250-C
- Voltage: 24 VDC
- Static Torque: 70 lb. in.
- Max RPM: 7500
- 5130-273-054
- EP Series
- Model Size: EP-250-C
- Voltage: 24 VDC
- Static Torque: 70 lb. in.
- Max RPM: 7500
- 5131-273-009
- EP Series
- Model Size: EP-400
- Voltage: 6 VDC
- Static Torque: 270 lb. in.
- Max RPM: 4500
- 5131-273-010
- EP Series
- Model Size: EP-400
- Voltage: 24 VDC
- Static Torque: 270 lb. in.
- Max RPM: 4500
- 5131-273-011
- EP Series
- Model Size: EP-400
- Voltage: 90 VDC
- Static Torque: 270 lb. in.
- Max RPM: 4500
- 5230-273-002
- EP Series
- Model Size: EP-500
- Voltage: 6 VDC
- Static Torque: 50/40 lb. ft.
- Max RPM: 4000
- 5230-273-003
- EP Series
- Model Size: EP-500
- Voltage: 90 VDC
- Static Torque: 50/40 lb. ft.
- Max RPM: 4000
- 5230-273-011
- EP Series
- Model Size: EP-500
- Voltage: 24 VDC
- Static Torque: 50/40 lb. ft.
- Max RPM: 4000
- 5231-273-002
- EP Series
- Model Size: EP-825
- Voltage: 90 VDC
- Static Torque: 125 lb. ft.
- Max RPM: 3600