On-Off

Controls – On-Off

On and Off Controls Basic Start-Stop

Warner Electric’s On-Off Controls provide basic starting and stopping functions for use with one or two clutch/brake units. They are available for conduit box, octal socket, or panel mounting applications.

INTEGRAL/CONDUIT BOX MOUNTED CONTROLS

CBC-100 Series Controls
Single Channel Capacity The CBC-100 mounts inside a standard Warner Electric conduit box and includes rectification and suppression circuits

CBC-100
Model No.	Input Voltage	Output Voltage	Part No.
CBC-100-1	120 VAC	90 VDC	6003-448-101
CBC-100-2	220/240 VAC	90 VDC	6003-448-103

CBC-150 Series Controls
Dual Channel Capacity The CBC-150 replaces the cover on the standard module conduit box. Provides rectification and suppression for two devices. Green LED indicates power to clutch. Red LED indicates power to brake

CBC-150
Model No.	Input Voltage	Output Voltage	Part No.
CBC-150-1	120 VAC	90 VDC	6004-448-001
CBC-150-2	220/240 VAC	90 VDC	6004-448-002

CBC-160 Series Controls
Electrically Released Brake Control The CBC-160 clutch/brake control provides a single 90 VDC adjustable output for use with any clutch/brake unit. The adjustable output will provide consistent and repeatable release for Warner Electric’s 90 VDC permanent magnet electrically released brakes. The CBC-160 mounts as the cover on the standard module conduit box.

The 160-1 accommodates 120 volts A.C. motors, while the power to the 160-2 control can come from either a 230 volt or 460 volt A.C. motor. Customer-provided switching is accomplished through the motor starter on the A.C. input. This allows convenient retrofit of spring-set style motor brakes and inexpensive installation of new applications.

CBC-160
Model No.	Input Voltage	Output Voltage	Part No.
CBC-160-1N	120 VAC	Single Channel, 30-100 VDC	6013-448-001
CBC-160-2N	220/240 VAC	Single Channel, 30-100 VDC	6013-448-002

PLUG-IN OCTAL SOCKET CONTROLS

CBC-801 Series Controls
Multi-Unit Capacity The CBC-801 is a basic on-off power supply that provides full voltage to a 90 volt clutch or brake and is activated by an external switch. The CBC-801 is a plug-in power supply, which is used with an octal socket (purchased separately). The CBC-801 will operate two units separately, or simultaneously.

CBC-801
Model No.	Input Voltage	Output Voltage	Part No.
CBC-801-1	120 VAC	90 VDC	6001-448-004
CBC-801-2	220/240 VAC	90 VDC	6001-448-006

CBC 802 Series
PLC Compatible The CBC-802 is a power supply with solid state circuits for load switching. A brake and clutch may be operated separately – or, two brakes or two clutches, one unit on at a time. The CBC-802 mounts on an octal socket (purchased separately), and the wiring connections are made at the socket terminals.

CBC-802
Model No.	Input Voltage	Output Voltage	Part No.
CBC-802	120 VAC	90 VDC	6002-448-001

PANEL MOUNTED CONTROLS

CBC 400 series dual channel control
Dual Channel Control The CBC-400 is a basic on-off control which supplies 24 or 90 VDC for electric clutch/brake operation. They offer optically isolated switching inputs for start, stop, and emergency stop (E-stop). These controls can be set up to operate the two outputs alternately (single) or simultaneously (dual).