CALL 800-985-6929
Mon-Fri 7AM - 7PM CST
Power Supply
The DC voltage required to release the Warner Electric ER-1225 Brake is supplied by the MCS-805-1 or MCS-805-2 Power Supply. The correct brake release voltage— approximately 35-75 volts DC—is set by adjusting the power supply at the time of brake installation. Temperature compensating circuits provide proper operation over the entire operating range of 0°F to 150°F. Switching may be provided on either the AC or DC side of the power supply. The MCS-805-1 may be mounted on its back panel or on 1/2″ conduit. The MCS-805-2 has a torque adjustment capability for soft stop applications. The MCS-805-2 requires two switching circuits when used for those applications requiring soft engagement.
| MCS-805-1 / MCS-805-2 | |||
|---|---|---|---|
| Model No. | Input | Output | Part No. |
| MCS-805-1 | 115/230 VAC, 50/60 Hz +10% | 0.4 Amp, 35/75 VDC | 6090-448-006 |
| MCS-805-2 | 115/230 VAC, 50/60 Hz +10% | 0.4 Amp, 35/75 VDC | 6090-448-007 |
Manuals and Specifications
 |
||
| Catalog | Warner Electric Power Supply Units Catalog | |
| Catalog | Warner Electric Clutch and Brake Controls Catalog |
$423.40
- 901-00-019
- Power Supply
- Model Size: WSCC-102
- Input: 120/240 VAC, 50/60 Hz
- Output: 160/290 VDC
- Cycle Rate: 300 CPM
$444.55
- 901-00-014
- Power Supply
- Model Size: WSCC-101
- Input: 120/240 VAC, 50/60Hz
- Output: 160/290 VDC
- Cycle Rate: 300 CPM
Out of stock
- 6090-448-006
- Power Supply
- Model Name: MCS-805-1
- No. of Channels: 1
- Torque Control Channels: 1
- A.C. Input Voltages: 120
- D.C. Output Voltages: 35
- OverExcitation: No
- Customer Supplied Switching Options: Relay D.C.
Out of stock
- 6090-448-007
- Power Supply
- Model Size: MCS-805-1
- No. of Channels: 1
- Torque Control Channels: 1
- A.C. Input Voltages: 240
- D.C. Output Voltages: 75
- OverExcitation: No
- Customer Supplied Switching Options: Relay D.C.