UM-FBC Series

UniModule Clutch/Electrically Released Brake Combination

UM-FBC Series
Warner Electric offers the convenience of pre-assembled UniModule clutch/electrically released brake packages. Assembly, alignment, and pre-burnishing have been done at the factory. Bolt it on, wire it up, and your clutch/electrically released brake is ready to go. Available in both C-face and base mounted versions. Warner Electric’s unique design employs powerful permanent magnets for maximum torque when power is removed from the brake coil. A small amount of electrical power applied to the brake coil nullifies the permanent magnets and the brake releases. No springs to limit cycle rates. Never any adjustments. No lubrication. These brakes are recommended for dynamic cycling operations only.

UM-FBC Series
Product Data – Reference (Pages 144-150) in catalog P-1234

MOTOR CLUTCH/ ER BRAKE

Model No.	Voltage D.C.	GEN 2 Part No	Part No
UM-50-1020FBC	24	5370-273-243	5370-273-037
UM-50-1020FBC	90	5370-273-244	5370-273-036
UM-100-1020FBC	24	5370-273-248	5370-273-153
UM-100-1020FBC	90	5370-273-249	5370-273-125
UM-180-1020FBC	24	5370-273-253	5370-273-047
UM-180-1020FBC	90	5370-273-254	5370-273-046
UM-210-1020FBC	24		5371-273-013
UM-210-1020FBC	90		5371-273-012
UM-215-1020FBC	24		5371-273-099
UM-215-1020FBC	90		5371-273-079

INPUT CLUTCH/ ER BRAKE

Model No.	Voltage D.C.	GEN 2 Part No.	Part No.
UM-50-2030FBC	24	5370-273-258	5370-273-042
UM-50-2030FBC	90	5370-273-259	5370-273-041
UM-100-2030FBC	24	5370-273-263	5370-273-154
UM-100-2030FBC	90	5370-273-264	5370-273-155
UM-180-2030FBC	24	5370-273-268	5370-273-052
UM-180-2030FBC	90	5370-273-269	5370-273-051
UM-210-2030FBC	24		5371-273-018
UM-210-2030FBC	90		5371-273-017
UM-215-2030FBC	24		5371-273-100
UM-215-2030FBC	90		5371-273-101

ACCESSORIES

Description	UM Size	Part No.
Conduit Box	All sizes	5370-101-042
Base Mount Kit for 2030 FBC	50/100 180 210/215	5370-101-004 5370-101-002 5371-101-019
Motor Mount Kit for 1020 FBC	50/100 180 210/215	5370-101-078 5370-101-079 5371-101-012
Cover Kit	50/100/180	5370-101-076

Gen2 units are direct replacements for original models

Changes to the housing fin design increases heat dissipation capacities, especially in the enclosed configuration of the UniModule.
Improved input to output axis design reduces vibration and improves noise and wear factors.
Use of custom designed mounting bolts allows for conduit box location directly on top of the unit.
Bolt hole patterns are re-positioned for ease of mounting.
Add-on enclosure cover kits allow for a unit to be upgraded to an enclosed unit in the field without replacing the clutch/brake. A cover plate bolts to both sides of the unit creating a completely enclosed brake package, which keeps contaminates out and wear particles in, for clean, quiet operation.